LOGISTICS
PACKAGING
All extra packaging, we bring into the site is just future garbage. The more we can avoid extra packaging, the less waste we make.
QUICK Blocks encourages builders’ merchants to collect in bulk from its Anfeh El Koura – based manufacturing works. Most our products are ex-stocked on wood pallets. Certain products are made to order and typically require notice prior to collection.
Please contact our sales office on +961 76 710 610 or +961 76 710 510 to clarify and make previous order.
Our products are generally banded with polyester bands but these should not be relied on for load security. Also, our products are supplied on pallets and those pallets are returnable refundable.
Customers can bring their own pallets but they must be large enough and substantial enough to support the products purchased.
Blocks are available for collection from site or may be delivered to site by our dedicated hauliers.
DELIVERIES
Blocks are available for collection from site or may be delivered to site by our dedicated hauliers.
Six wheeler and trailer
- GVW: 44 tonnes
- Payload: 26 to 27 tonnes
- Length typically: 16.5m
Articulated lorry
- GVW: 44 tonnes
- Payload: 26 to 27 tonnes
- Length typically: 16m
Curtainsided articulated – for customer to unload with forklift or telehandler
- GVW: 44 tonnes
- Payload: 27 tonnes
- Length typically: 17m
Eight wheeler rigid lorry
- GVW: 32 tonnes
- Payload: 19 tonnes
- Length typically: 10.5m
Six wheeler rigid lorry
- GVW: 26 tonnes
- Payload: 14 tonnes
- Length typically: 9.5m
COLLECTIONS
QUICK Blocks encourages builders’ merchants to collect in bulk from its Anfeh, El-Koura based manufacturing works – Monday to Saturday – 8 am to 4 pm.Most items are ex-stock but sometimes products generally made to order and would require notice prior to collection. Please contact our sales office on +961 76 710 610 or +961 76 710 510 to clarify and make previous order. Most products are supplied on wood pallets and those pallets are refundable and returnable. Usually QUICK Blocks wood pallets dimensions are 1 meter long and 80 cm in width or 120 cm in length and 1 meter in width. Customers can bring their own pallets but they must be large enough and substantial enough to support the products purchased. Blocks are available for collection from site or may be delivered to site by our dedicated hauliers. The collection vehicles can be like any of our delivery vehicle options.
PRODUCT SAFETY
Identification of the substance Pre-cast concrete products manufactured by QUICK Blocks, including; hollow blocks, thermally insulated blocks, roofing hourdie, lintels, concrete paving & interlocking products, as well as water channels, kerbstones and blocks for retaining wall structures.
Hazards identification: Handling of pre-cast concrete products may cause abrasive damage to the hands. Excessive handling may cause dermatitis or drying of unprotected skin. Cutting or similar surface treatment of the products will give rise to respirable dust. Such dust, if containing quartz and if inhaled in excessive quantities over extended periods, can constitute a long-term health hazard. Cutting etc, unless adequately controlled, can project particles at high velocity with consequent risk of impact damage.
Composition and information on ingredients: natural and recycled aggregate, cement, pulverised fuel ash, lightweight expanded clay aggregate, water, sand, pigment and admixtures are used to make pre-cast concrete products.
First-aid measures :
- Eye contact: if dust makes contacts with the eyes and causes irritation, irrigate with water. If symptoms persist, seek medical attention.
- Skin contact: if dust contact open skin and causes irritation, wash with water. If symptoms persist, seek medical attention.
- Ingestion: if dust is ingested and causes irritation, remove affected person from area. If symptoms persist, seek medical attention.
- Inhalation: if dust is inhaled and causes irritation, remove affected person from area. If symptoms persist, seek medical attention.
Fire-fighting measures: pre-cast concrete is a non-combustible product; therefore, no specific instructions are required.
Accidental release measures: not applicable
Handling and storage: Particular care should be taken in the stacking, un-banding and general handling of packs and individual units. Manual Handling regulations should be followed always. Packs should be stored on firm, level ground and they should be stable.
Exposure controls and personal protection: Whilst handling, suitable clothing should be worn to prevent skin contact with product. Protective gloves and protective footwear should be worn. Cutting or similar activity will give rise to dust. This should be done in a well-ventilated area, appropriate dust masks should be worn, as well as goggles and protective footwear.
Physical and chemical properties: pre-cast concrete products are manufactured to fine tolerances by the compaction of a hydrated mixture of aggregates and cementitious materials which subsequently undergo a curing process.
Stability and reactivity: not applicable.
Ecological information: not applicable.
Disposal considerations: pre-cast concrete products are inert, but all products and associated packaging should be disposed of in accordance with local legal requirements.
Transport information: the carriage of pre-cast concrete products is not subject to hazardous substance conveyance regulations and vehicle labelling is not required. Pre-cast concrete products are packaged with polyester banding. This banding should not be relied upon for load security or retention.
Regulatory information: all relevant Health & Safety Legislation should be complied with.